DLP Series- Visionpro CH3

Download:

pdf Visionpro® CH3 LED Series Brochure

 

VTRON LED Series is the revolutionary new species of DLP video wall display. It is perfectly designed for continuous operations with minimal hazardous impact to the environment. The ABC-MS (Auto Brightness/Color management system) minimizes the hassle of Color and Brightness set up. No replacement of consumable components is needed, and the end user can enjoy the lowest cost system maintenance and operations.

Long-Life and color sharpness
Environmentally friendly
Durable with low cost of operations
 
VTRON Visionpro® CH3 LED Series develops the green energy potential for demanding 24/7 control room applications. With LED light technology,   VTRON CH3 LED Series guarantees breakthrough image quality, the best color saturation, as well as high brightness on display of SXGA+ (1,400 x 1,050) resolution. With a wide selection of VTRON screens: XPS, BUCS, GUCS, and Black-beaded, VTRON provides a flexible, reliable, and stable display solution to the control room that best fits customers’ needs.

Series Features and Benefits

Environmentally Friendly:
 RGB LED Light Source
 MTBF of LED – 60,000 hours
 Low energy consumption and no waste of consumable resources
 

Automatic Color and Brightness Management:

Real-time feedback of the optical sensor
Control the consistency of color and brightness
Eliminate color and brightness setup time
 
High Image Quality:
High color brightness, high contrast, and no rainbow effect
High Degree of Color Performance - Carry out 7 independent color’s (RGBCMYW) saturation and brightness adjustment
Wide Color Spectrum
 
 
 Built-in Processor
 Flexible and direct input
 Multiple VIDEO and RGB signals can be displayed and superimposed
 
 ISV Video Processing Technology by VTRON:
 Outstanding Images Performance
 “Clear & Sharp Display” in terms of image sharpness and vivid color fidelity
 
 Lowest Cost of Operations/Ownership:
 Save 80% consumable expenses over 5 years
 Extreme long MTBF, No consumable components (color wheel, dynamic aperture, etc)
 Minimal down time – the system can be started/restarted in a few seconds
 
 HDMI High Definition Input
 
HDMI (High-Definition Multimedia Interface) input port on the built-in processor for transmitting uncompressed digital data is available. High-speed serial TMDS Data could be  transmitted. Any high definition video signal or signal rendered with optium resolution could be displayed.
 
 Ethernet Control 
 
One RJ-45 female port is available on VTRON’s LED Video Cube. This gives higher flexibility for managing and controlling the video wall.
 
Ethernet-enabled control system works directly with the VTRON VWAS software for the industry’s most comprehensive video wall management solution.

Traditional Lamp Based System

LED Based System

Application

VTRON LED Series satisfy modern control centers’ 24/7 critical information display, monitoring, and control operations in Traffic Control, Military Command Centers, Telecom,  Power Control, Production Line Control, Entertainment, Flood Control, etc.

Specifications Visionpro® CH3 LED Series SXGA+ DLP Display Cube
Specifications Configuration
Display Technology DLP (0.95” DMD, 12º LVDS Darkchip)
Native Resolution SXGA+, 1400×1050 pixels
MTBF of DMD 100,000 hours
Light Source LED (RGB)
Life time of LED 60,000 hours
Brightness 650 ANSI lumens (typical)
Dynamic Contrast 100,000 : 1
Projection Characteristics > 95% brightness uniformity
Gap < 0.5 mm
Flatness Tolerance < 0.3 mm
Signal Interface
Standard DVI-I Input
Input
Processor Analog RGB 640x480~1920x1200 HF: 31-75kHz VF: 59-61Hz Dot clock: 25~165MHz
Digital RGB 640x480~1920x1200
Optional Board Video YCrCb input 3BNC x 1 1080p, 1080i, 720p, etc
S-Video 2BNC x 1 (with YCrCb) NTSC, PAL, SECAM
Video BNC x 2 (with YCrCb) NTSC, PAL, SECAM
HDMI 640x350~1920x1200 HF: 31~100KHz VF: 23~121Hz Dot clock: 25~165MHz
Analog RGB
Digital RGB DVI-D x 2 (TMDS)
Control Port
RJ45 10/100M
IR Remote Optional
Power Supply
AC Voltage 100/240V
Frequency 50/60H
Power Consumption 350W
Working Conditions
Temperature 0~45℃ , Recommend temp. : 22 ℃ ± 5 ℃
Relative Humidity 20~85%, Non-Condensing
* The above specifications may be subject to change without prior notice.
 
Visionpro®CH3 LED Series 50", 60" & 67" Mechanical Parameters
Model
C-SX503
C-SX603
C-SX673
Screen Size (Diagonal)
50”
60”
67”
Screen Type
BB/XPS
BUCS
BB/XPS
GUCS
BB/XPS
Screen Gain
1.0/1.9
2.4/3.7
1.0/1.9
2.4/3.7
1.0/1.9
Horizontal Viewing Angle
160°/160°
170°/160°
160°/160°
170°/160°
160°/160°
Vertical Viewing Angle
160°/150°
110°/80°
160°/150°
110°/80°
160°/150°
Dimensions(mm)
A
1000
1220
1370
B
750
915
1027.5
C
695
750
795
H
995
1250
1387.5

Back